Directorio

Vázquez-Vélez, E., Monzón-Mendoza, J., Martínez, H., & Campillo, B. (2022). Synthesis of non-ionic, cationic, and anionic surfactant from coconut oil for remediation of diesel contaminated soil. Revista Mexicana De Ingenieria Quimica, 21(3), 1-18.
DOI:10.24275/rmiq/ia2776

García-Cerna, S., Sánchez-Pacheco, U., Meneses-Acosta, A., Rojas-García, J., Campillo-Illanes, B., Segura-González, D., & Peña, C.* (2022). Evaluation of Poly-3-Hydroxybutyrate (P3HB) Scaffolds Used for Epidermal Cells Growth as Potential Biomatrix. Polymers, 14(19), 4021.
DOI:10.3390/polym14194021

Monzamodeth, R. A.*, Iván, R. N., Bernardo, H., Osvaldo, F., Fermín, C. A. V., & Bernardo, C. (2022). Beehive wind turbine: A new design for electric power generation in urban and semi-urban zones. Wind Engineering, 46(5), 1427-1439.
DOI:10.1177/0309524×221080573

Villalobos, J. C.*, Del-Pozo, A., Vergara-Hernández, H. J., Vázquez-Gómez, O., Escudero-García, C. F., Serna, S. & Campillo, B. (2022). Hydrogen gaseous embrittlement effect over mechanical properties of an experimental X-120 microalloyed steel subjected to heat treatments and different cooling rates. International Journal of Hydrogen Energy, 47(71), 30707-30721.
DOI:10.1016/j.ijhydene.2022.07.042

Monzamodeth, R.*, Román-Roldán, N., Hernández-Morales, B., Puente, I., Flores, O., Castillo, F. & Campillo, B. (2022). The feasibility of masks and face shields designed by 3D printing makers; some considerations of their use against the COVID-19. Materials Today: Proceedings, 59, 756-763.
DOI:10.1016/j.matpr.2021.12.503

Román-Sedano, A. M.*, Campillo, B., Castillo, F., & Flores, O. (2022). Failure Analysis of Austenitic Stainless Steel Implant Screws and Prospection of Chemical Composition Using Artificial Intelligence. World Journal of Engineering and Technology, 10(01), 98–118.
DOI:10.4236/wjet.2022.101006

Monzamodeth, R. S. A., Nicolás Iván, R. R., Oscar, X., Bernardo, H. M., Osvaldo, F., Fermín, C., & Bernardo, C. (2021). Development of a wind turbine using 3D printing: A prospection of electric power generation from daily commute by car. Wind Engineering, , 46(2), 376-391.
DOI:10.1177/0309524×211029563

Martínez, L.*, García-Salgado, G., Morales-Morales, F., Campillo, B., Hernández, A. G., Karthik, T. V. K., Jiménez-Vivanco, M. R., & Campos-álvarez, J. (2021). ZnO Films Incorporation Study on Macroporous Silicon Structure. Materials, 14(13), 3697.
DOI:10.3390/ma14133697

Serna, S. A., Verduzco, J. A., Campillo, B. F., Molina, A., Guardian, R., del Pozo, A., Sedano, A., & Villanueva, H*. (2021). Synthesis and Characterization of a Ni₃Al Intermetallic Modified with Copper Atoms via Powder Metallurgy. Journal of Materials Engineering and Performance, 30(3), 1906-1913.
DOI:10.1007/s11665-021-05541-6

Monzamodeth, R. S.*, Campillo, B., & Flores, O. (2021). Hydrogen diffusion in Ni-Cr-Fe system. Materials Today: Proceedings, 42, 1170-1175.
DOI:10.1016/j.matpr.2020.12.534

Xosocotla, O., Martinez, H., & Campillo, B. (2021). Surface Modification of Polypropylene by Atmospheric Pressure Plasma. Journal of Nuclear Physics, Material Sciences, Radiation and Applications, 8(2), 97-104.
DOI:10.15415/jnp.2021.82011

Pardo L., E., Rodil, S. E., Campillo, B., Dominguez, I., González-Rodriguez, J. G., & Martinez, H. (2021). Wear Behavior of a Ni/Co Bilayer Coating by Physical Vapor Deposition on AISI 1045 Steel. Journal of Nuclear Physics, Material Sciences, Radiation and Applications, 8(2), 203-209.
DOI:10.15415/jnp.2021.82027

Flores, O., Campillo, B., Castillo, F., Martínez, H., & Colín, J. (2021). Surface modification of polyethylene terephthalate (PET) by corona discharge plasma. Journal of Nuclear Physics, Material Sciences, Radiation and Applications, 8(2), 129-134.
DOI:10.15415/jnp.2021.82016

Hernández-Vargas, M. L.*, Castillo-Pérez, R., Flores-Cedillo, O., & Campillo-Illanes, B. F. (2021). Modification of macromolecular dynamics in polyacrylic hybrid nanocomposite with un-treated SiO₂ nanoparticles. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 265, 114976.
DOI:10.1016/j.mseb.2020.114976

Rojas, H., Molina, A., Valdez, S., Campillo, B., Martínez, H., Sedano, A., & Serna, S.* (2020). The impact of heat input on the microstructures, fatigue behaviors, and stress lives of TIG-welded 6061-T6 alloy joints. Materials Research Express, 7(12), 126512.
DOI:10.1088/2053-1591/abd136

Xosocotla, O.*, Martinez, H., & Campillo, B. (2020). Crystallinity and Hardness Enhancement of Polypropylene using Atmospheric Pressure Plasma Discharge Treatment. Advances in Science, Technology and Engineering Systems, 5(6), 1250-1257.
DOI:10.25046/AJ0506149

Torres-Islas, A., Guerra, F. V., Bedolla-Jacuinde, A., Molina-Ocampo, A., Serna, S., Campillo, B., & Martinez, H. (2020). Development and Corrosion Characterization of Ultra-High Strength Steels. International Journal of Electrochemical Science, 11112-11122.
DOI:10.20964/2020.11.22

Villalobos, J. C., Del-Pozo, A., Mayen, J., Serna, S., & Campillo, B. (2020). Hydrogen embrittlement suscetibility on X-120 microalloyed steel as function of tempering temperature. International Journal of Hydrogen Energy, 45(15), 9137-9148.
DOI:10.1016/j.ijhydene.2020.01.094

Díaz-Villaseñor, P. G., Vázquez-Gómez, O., Barrera-Villatoro, E. F., Vergara-Hernández, H. J., López-Martínez, E., & Campillo, B. (2020). Dilatometric analysis of the martensite decomposition by stages during continuous heating. En The minerals, metals & materials series, 1861-1870.
DOI:10.1007/978-3-030-36296-6_172

Hernández-Guerrero, O., Campillo-Illanes, B. F., Domínguez-Patiño, M. L., Benavente, R., Martínez, H., Sedano, A., & Villanueva, H. (2020). Comparative studies of the mechanical and thermal properties of clay / copolymer nanocomposites synthesized by two in-situ methods and solution blending method. Journal of Polymer Research, 27(5).
DOI:10.1007/s10965-019-1966-3

Monzamodeth, R. S., & Campillo, B. (2020). Study of the Erosion of Copper by Hot Plasma. Journal of Nuclear Physics, Material Sciences, Radiation and Applications, 7(2), 173-179.
DOI:10.15415/jnp.2020.72022

López-Martínez, E., Garzón-Bonetti, D., Vázquez-Gómez, O., Garnica-González, P., & Campillo, B. (2019). Estimation of Residual Stresses by Nanoindentation in an Experimental High Strength Microalloyed Steel Subjected to Rapid Thermal Cycles. Journal of Materials Engineering and Performance, 28(12), 7324-7331.
DOI:10.1007/s11665-019-04467-4

Hernández, A., Torres, Á., Serna, S., Mayén, J., & Campillo, B. (2019). Effect of experimental aging on the performance of al-7.9Mg-13.3Zn and al-10.5Mg-8.6Zn alloys as sacrificial anodes. Metals, 9(8), 863.
DOI:10.3390/met9080863

Villanueva, H., Campillo, B. F., Molina, A., Colín, J., Sedano, A., & Serna, S. A. (2019). Synthesis and characterization of aluminum matrix composites reinforced with (ni,cu)3Al intermetallic particles via mechanical milling technique. Journal of Materials Engineering and Performance, 28(4), 2221-2227.
DOI:10.1007/s11665-019-03952-0

Del-Pozo, A., Torres-Islas, A., Villalobos, J. C., Sedano, A., Martínez, H., Campillo, B., & Serna, S. (2019). Stress corrosion cracking of microalloyed pipeline steel in biofuels E-10 and E-85. Corrosion Engineering Science and Technology, 54(1), 37-45.
DOI:10.1080/1478422X.2018.1523774

Hernández, A., Campillo, B., Serna, S., Torres, Á., & Loera, N. (2019). Characterization of Oxides from Al–Mg–Zn Alloys with Heat Treatment, with Scanning Electron Microscopy and Fluorescence Microscopy. En The minerals, metals & materials series, 535-541.
DOI:10.1007/978-3-030-05749-7_53

Fragiel, A., Serna, S., Malo-Tamayo, J., Silva, P., Campillo, B., Martínez-Martínez, E., Cota, L., Staia, M. H., Puchi-Cabrera, E. S., & Perez, R. (2019). Effect of microstructure and temperature on the stress corrosion cracking of two microalloyed pipeline steels in H2S environment for gas transport. Engineering Failure Analysis, 105, 1055-1068.
DOI:10.1016/j.engfailanal.2019.06.028

Castillo-Pérez, R., Hernández-Vargas, M. L., Flores-Cedillo, O., & Campillo-Illanes, B. F. (2019). Effect on thermo-mechanical properties by in-situ emulsion polymerization of polymer/clay nanocomposites. Polymer Composites, 40(1), 263-276.
DOI:10.1002/pc.24640

Gallegos-Pérez, A. I., Vázquez-Gómez, O., Vergara-Hernández, H. J., Campillo-Illanes, B., Salgado-López, J. M., & Arenas-Serrano, A. R. (2019). The use of nanoindentation for low carbon steel wire characterization. Materials Science and Technology 2018, MS and T 2018, 1098-1105.
DOI:10.7449/2018mst/2018/mst_2018_1098_1106

Velazquez-Torres, N., Martinez, H., Porcayo-Calderon, J., Vazquez-Velez, E., Florez, O., Campillo, B., Gonzalez-Rodriguez, J. G., & Martinez-Gomez, L. (2018). Effect of plasma pre-oxidation on the cu corrosion inhibition in 3.5% NaCl by an environmentally friendly amide. International Journal of Electrochemical Science, 13(9), 8915-8930.
DOI:10.20964/2018.09.07

Villalobos, J. C., Del-Pozo, A., Campillo, B., Mayen, J., & Serna, S. (2018). Microalloyed steels through history until 2018: Review of chemical composition, processing and hydrogen service. Metals, 8(5), 351.
DOI:10.3390/met8050351

Cruz-Chávez, M. A., Serna-Barquera, S. A., Juárez-Chávez, J., Romero, R. J., Cruz-Rosales, M. H., & Campillo-Illanes, B. (2018). Optimization-heuristic of mechanical properties of acicular ferrite steel. Materials Science and Engineering A, 721, 65-73.
DOI:10.1016/j.msea.2018.02.076

Villalobos, J. C., Serna, S. A., Campillo, B., & López-Martínez, E. (2017). Evaluation of mechanical properties of an experimental microalloyed steel subjected to tempering heat treatment and its effect on hydrogen embrittlement. International Journal of Hydrogen Energy, 42(1), 689-698.
DOI:10.1016/j.ijhydene.2016.10.103

Vázquez-Gómez, O., López-Martínez, E., Gallegos-Pérez, A. I., Santoyo-Avilés, H., Vergara-Hernández, H. J., & Campillo, B. (2017). Kinetic Study of the Austenite Decomposition During Continuous Cooling in a Welding Steel. En The minerals, metals & materials series, 749-760.
DOI:10.1007/978-3-319-52132-9_74

Castillo, F., Valdés, D., Flores, O., Campillo, B., & Martínez, H. (2017). Study of an atmospheric-pressure discharge in air. 16th Latin American Workshop on Plasma Physics, LAWPP 2017 – Conference Proceedings, 37-42.
DOI:10.1109/LAWPP.2017.8692193

Mayén, J., Abúndez, A., Pereyra, I., Alcudia, E., Porcayo-Calderón, J., Colín, J., & Campillo, B. (2017). Correlation between mechanical properties and corrosion behavior of an al 6061 alloy coated by 5% CH3COOH pressurized steam and RRA heat treated. Surface and Coatings Technology, 309, 344-354.
DOI:10.1016/j.surfcoat.2016.11.053

Barraza-Fierro, J. I., Serna-Barquera, S. A., Campillo-Illanes, B. F., & Castaneda, H. (2017). EIS behavior of experimental high-strength steel in near-neutral pH and load conditions. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48(4), 1944-1958.
DOI:10.1007/s11661-017-3973-5

Hernandez-Guerrero, O., Castillo-Pérez, R., Hernández-Vargas, M. L., & Campillo-Illanes, B. F. (2017). Thermo-mechanical Properties of Copolymer/Clay Nanocomposites: A Comparative Study of Production Method by In-situ and Solution Mixture. En The minerals, metals & materials series, 457-464.
DOI:10.1007/978-3-319-52132-9_46

Hernandez-Guerrero, O., Castillo-Pérez, R., Hernández-Vargas, M. L., & Campillo-Illanes, B. F. (2017). Study of thermal and mechanical properties of Clay/Polymer nanocomposite synthesized via modified solution blending. MRS Advances, 2(49), 2757-2762.
DOI:10.1557/adv.2017.560

Fuentes-Miranda, A., Campillo-Illanes, B., Fernández-Garcia, M., & López-García, D. (2017). Thermomechanical properties of silica-polyacrylic nanocomposites. MRS Advances, 2(49) 2745-2750.
DOI:10.1557/adv.2017.539

Hernández-Vargas, M. L., Castillo-Perez, R., Hernández-Guerrero, O., Flores-Cedillo, O., & Campillo-Illanes, B. F. (2017). Thermo-mechanical properties of waterborne acrylate hybrid nanocomposites. In: Meyers M. et al. (eds) Proceedings of the 3rd Pan American Materials Congress. The Minerals, Metals & Materials Series. Springer, Cham.
DOI:10.1007/978-3-319-52132-9_45

Castillo-Pérez, R., Hernández-Vargas, M. L., Hernández-Guerrero, O., Campillo-Illanes, B. F., & Flores-Cedillo, O. (2017). Thermo-mechanical behavior of nanostructure polyacrylic polymer based on Al2O3 and bentonite nanoparticles. In: Meyers M. et al. (eds) Proceedings of the 3rd Pan American Materials Congress. The Minerals, Metals & Materials Series. Springer, Cham.
DOI:10.1007/978-3-319-52132-9_44

Castillo-Pérez, R., Hernández-Vargas, M. L., Hernández-Guerrero, O., Campillo-Illanes, B. F., & Flores-Cedillo, O. (2017). Dynamic mechanical analysis of acrylic copolymer-TiO2 nanoparticles. MRS Advances, 2(49) 2751-2756.
DOI:10.1557/adv.2017.540

Hernández-Vargas, M. L., Castillo-Perez, R., Hernández-Guerrero, O., Campillo-Illanes, B. F., & Flores-Cedillo, O. (2017). A comparative study of un-modified and modified acrylate-SiO2 nanocomposites. MRS Advances, 2(49) 2737-2743.
DOI:10.1557/adv.2017.538

López-Martínez, E., Vázquez-Gómez, O., Vergara-Hernández, H. J., Serna, S., & Campillo, B. (2016). Mechanical characterization of the welding of two experimental HSLA steels by microhardness and nanoindentation tests. Metals and Materials International, 22(6), 987-994.
DOI:10.1007/s12540-016-6271-7

Miranda, M., Campillo, B., Villalobos, J. C., Colín, J., Torres-Islas, A., Molina, A., & Serna, S. (2016). Analysis of electrochemical hydrogen permeation through AISI stainless and welding zones for hydrogen service. International Journal of Electrochemical Science, 11(11), 9340-9354.
DOI:10.20964/2016.11.60

Abúndez, A., Pereyra, I., Campillo, B., Serna, S., Alcudia, E., Molina, A., Blanco, A., & Mayén, J. (2016). Improvement of ultimate tensile strength by artificial ageing and retrogression treatment of aluminium alloy 6061. Materials Science and Engineering A, 668, 201-207.
DOI:10.1016/j.msea.2016.05.062