Facultad de Química

Carlos González Rivera

Departamento: Ingeniería Metalúrgica
   Perfil: Profesores-Investigadores
 Nombramiento: Profesor de Carrera Titular
   Ubicación: Edificio D, Cubículo 12
  Teléfono: 55 56225238 / 55 56225225

  Correo: carlosgr@unam.mx


 
 

Línea de Investigación
 
 
  • Solidificación y Fundición
  • Cinética de Solidificación
  • Análisis de Procesos Metalúrgicos
  • Desarrollo de aleaciones con aplicaciones biomédicas

Publicaciones recientes
 
 

Posadas-Navarro, D. I., González-Rivera, C., Ramírez-Argáez, M. A., & Ascanio, G.* (2023). Power characteristics and mass transfer of rotor injectors in a water physical model of an aluminum degassing ladle. Chemical engineering research & design, 191, 261-270.
DOI:10.1016/j.cherd.2023.01.040

Jardón-Pérez, L. E., Conejo, A. N., Amaro-Villeda, A., González-Rivera, C., & Ramírez-Argáez, M. A.* (2023). Analysis of the Effect of Gas Injection System on the Heating Rate of a Gas Stirred Steel Ladle Assisted by Physical Modeling and PIV-PLIF Measurements. Isij International, 63(3), 484-491.
DOI:10.2355/isijinternational.isijint-2022-360

González-Rivera, C., Ramirez-Argáez, M. A., Amaro-Villeda, A., Trápaga-Martínez, G., & Jardón-Pérez, L. E.* (2022). Optimizing the Performance of a Dual‐Injection Gas‐Stirred Ladle Using Physical Modeling. Steel research international, 2100719.
DOI:10.1002/srin.202100719

Jardón-Pérez, L. E., González-Rivera, C., Trápaga-Martínez, G., Amaro-Villeda, A., & Ramírez-Argáez, M. A.* (2021). Experimental Study of Mass Transfer Mechanisms for Solute Mixing in a Gas-Stirred Ladle Using the Particle Image Velocimetry and Planar Laser-Induced Fluorescence Techniques. Steel Research International.
DOI:10.1002/srin.202100241

Juarez-Hernandez, A., Trapaga-Martinez, G., Camacho-Martinez, J. L., Gonzalez-Rivera, C., & Juarez, I. L. (2020). Alternative system to measure hydrogen content in molten aluminium using an electrochemical sensor. Indian Journal of Engineering and Materials Sciences, 27(5), 1037-1042.

Jardón-Pérez, L. E., González-Rivera, C., Ramirez-Argaez, M. A., & Dutta, A. (2020). Numerical Modeling of Equal and Differentiated Gas Injection in Ladles: Effect on Mixing Time and Slag Eye. Processes, 8(8).
DOI:10.3390/PR8080917

Jardón-Pérez, L. E., Amaro-Villeda, A. M., Trápaga-Martínez, G., González-Rivera, C., & Ramírez-Argáez, M. A. (2020). Utilization of the Planar Laser-Induced Fluorescence Technique (PLIF) to Measure Temperature Fields in a Gas-Stirred Ladle. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.
DOI:10.1007/s11663-020-01944-3

González-Rivera, C., Harrup, A., Aguilar, C., Amaro-Villeda, A. M., & Ramírez-Argáez, M. A. (2020). Determination of the latent heat of fusion and solid fraction evolution of metals and alloys by an improved cooling curve analysis method. Journal of Thermal Analysis and Calorimetry, 140(4), 1825-1836.
DOI:10.1007/s10973-019-08904-3

Gónzalez-Rivera, C., Harrup, A., Aguilar, C., Amaro-Villeda, A., & Ramírez-Argáez, M. (2019). Determination of the latent heat of fusion and solid fraction evolution of metals and alloys by an improved cooling curve analysis method. Journal of Thermal Analysis and Calorimetry.
DOI:10.1007/s10973-019-08904-3

Jardón-Pérez, L. E., González-Morales, D. R., Trápaga, G., González-Rivera, C., & Ramírez-Argáez, M. A. (2019). Effect of differentiated injection ratio, gas flow rate, and slag thickness on mixing time and open eye area in gas-stirred ladle assisted by physical modeling. Metals, 9(5).
DOI:10.3390/met9050555

Mancilla, E., Cruz-Méndez, W., Ramírez-Argáez, M. A., González-Rivera, C., & Ascanio, G. (2019). Experimental measurements of bubble size distributions in a water model and its influence on the aluminum kinetics degassing. Canadian Journal of Chemical Engineering, 97(S1), 1729-1740.
DOI:10.1002/cjce.23432

Ramírez-Argáez, M. A., Dutta, A., Amaro-Villeda, A., González-Rivera, C., & Conejo, A. N. (2019). A novel multiphase methodology simulating three phase flows in a steel ladle. Processes, 7(3).
DOI:10.3390/PR7030175

Jardón-Pérez, L. E., Amaro-Villeda, A., González-Rivera, C., Trápaga, G., Conejo, A. N., & Ramírez-Argáez, M. A. (2019). Introducing the planar laser-induced fluorescence technique (PLIF) to measure mixing time in gas-stirred ladles. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.
DOI:10.1007/s11663-019-01631-y

Jardón-Pérez, L. E., Gónzalez-Rivera, C., & Ramírez-Argáez, M. A. (2019). Effect of model size and water chemical composition on mixing time measurements using PLIF in a gas-stirred ladle. 2019 7th International Engineering, Sciences and Technology Conference (IESTEC), 261-266.
DOI:10.1109/IESTEC46403.2019.00-65

Gonzalez-Rivera, C., Amaro-Villeda, A., & Ramírez-Argáez, M. A. (2019). Determination of the Latent Heat of Fusion and the Solidification Path of a Hypoeutectic Al Based Alloy Using the Energy Balance Method. 2019 7th International Engineering, Sciences and Technology Conference (IESTEC), 72-77.
DOI:10.1109/IESTEC46403.2019.00022

Jardón Pérez, L. E., Amaro-Villeda, A., Conejo, A. N., González-Rivera, C., & Ramírez-Argáez, M. A. (2018). Optimizing gas stirred ladles by physical modeling and PIV measurements. Materials and Manufacturing Processes, 33(8), 882-890.
DOI:10.1080/10426914.2017.1401722

Abreu-López, D., Amaro-Villeda, A., Acosta-González, F. A., González-Rivera, C., & Ramírez-Argáez, M. A. (2017). Effect of the impeller design on degasification kinetics using the impeller injector technique assisted by mathematical modeling. Metals, 7(4).
DOI:10.3390/met7040132

Ramírez-Argáez, M., & González-Rivera, C. (2017). Modeling of metal-slag mass and momentum exchanges in gas-stirred ladles. In: Meyers M. et al. (eds) Proceedings of the 3rd Pan American Materials Congress. The Minerals, Metals & Materials Series. Springer, Cham.
DOI:10.1007/978-3-319-52132-9_76

Ramírez-Argáez, M., Abreú López, D., & González Rivera, C. (2017). Design of a rotor for aluminum degassing assisted by physical and mathematical modeling. MRS Advances, 2(61), 3759-3764.
DOI:10.1557/adv.2017.590

Jardón-Pérez, L. E., López-Gutierrez, A., Vazquez, A., González-Rivera, C., & Ramírez-Argáez, M. A. (2017). Physical and mathematical modeling of metal-slag exchanges in gas-stirred ladles. MRS Advances, 2(61), 3821-3829.
DOI:10.1557/adv.2017.607

Mancilla, E., Cruz-Méndez, W., Garduño, I. E., González-Rivera, C., Ramírez-Argáez, M. A., & Ascanio, G. (2017). Comparison of the hydrodynamic performance of rotor-injector devices in a water physical model of an aluminum degassing ladle. Chemical Engineering Research and Design, 118, 158-169.
DOI:10.1016/j.cherd.2016.11.031

Hernández-Hernández, M., Camacho-Martínez, J. L., González-Rivera, C., & Ramírez-Argáez, M. A. (2016). Impeller design assisted by physical modeling and pilot plant trials. Journal of Materials Processing Technology, 236, 1-8.
DOI:10.1016/j.jmatprotec.2016.04.031

Ramírez-Argáez, M., Jardón, E., & González-Rivera, C. (2016). Experimental and theoretical study on melting kinetics of spherical aluminum particles in liquid aluminum. Materials Research Society Symposium Proceedings, 1765, 139-144.
DOI:10.1557/opl.2015.820

López, J. A., Ramírez-Argáez, M. A., Amaro-Villeda, A. M., & González, C. (2016). Mathematical and physical modeling of three-phase gas-stirred ladles. Materials Research Society Symposium Proceedings, 1812, 29-34.
DOI:10.1557/opl.2016.14

Cualquier cambio de información puede solicitarla al correo fac.quimica@unam.mx escribiendo desde la cuenta de correo que tiene registrada en el directorio, si ya no usa esa cuenta favor de adjuntar una foto de su credencial de la FQ para poder validar.