Directorio
Liliana Romero Reséndiz
Correo: liliana.rr@quimica.unam.mx
Posdoctorado en la Universidad de la Ciudad de Hong Kong (City University of Hong Kong).
Doctora en Ciencia e Ingeniería de Materiales, proyecto colaborativo entre la Universidad Nacional Autónoma de México, México y la Universidad Politécnica de Valencia, España.
Maestría en Ciencia e Ingeniería de Materiales, Universidad Nacional Autónoma de México, México.
Ingeniería en Metalurgia y Materiales, Instituto Politécnico Nacional, México.
Metalurgia física, Materiales heteroestructurados, Nanomateriales, Biomateriales, Deformación plástica severa, Mecanismos de endurecimiento, Textura cristalográfica, Aleaciones de alta y media entropía, Relación Procesamiento-Microestructura-Propiedades.
[L] Introducción a la Ciencia e Ingeniería de Materiales.
[L] Fundamentos de Metalurgia y Materiales.
[L] Transformaciones de fase.
- Fellowship from the Juan de la Cierva program, Ministry of Science and Innovation of Spain, to develop the project “Manufacture of customized biphasic implants for the treatment of osteochondral defects”. 2023.
- Beca del programa Marie Skłodowska-Curie de la Unión Europea para desarrollar el proyecto “Mejora de la vida útil y disminución de la contaminación de componentes automotrices templados y particionados de acero 1180 mediante la confección microestructural y de texturas”. 2023.
- Miembro del Sistema Nacional de Investigadores Nivel I, otorgado por el Consejo Nacional de Humanidades, Ciencias y Tecnologías (CONAHCyT) del Gobierno de México. Enero de 2023 a enero de 2028.
- Organizadora del simposio “Heterostructured Materials: Fundamentals, Processing, Properties and Applications” del 31st International Materials Research Congress, 13 al 18 de agosto de 2023, México.
- Editora invitada del número especial “Processing-Microstructure-Properties Relationship of Advanced Alloys” de la revista Crystals. 2023.
- Editora principal del tema “Heterostructured Materials: Fundamentals, Processing, Properties and Applications” para la revista Materials Research Society (MRS) Advances. 2023.
- Editora invitada del número especial “Mechanical and microstructural behaviour of heterogeneous metallic materials” de la revista Materials. 2023.
- Miembro del Comité Editorial de la Facultad de Química de la Universidad Nacional Autónoma de México (UNAM). 2023.
- Miembro del comité de apoyo en la organización de la Primera Conferencia Internacional sobre Materiales Heteroestructurados (HSM I) (First International Conference on Heterostructured Materials), 12 – 15 de julio de 2022, Hong Kong, China.
- Presidenta General del Comité Organizador del VIII Simposio Anual de Estudiantes Relacionado con la Ciencia e Ingeniería de Materiales (SIMPEST 2020). 11 al 13 de noviembre de 2020. Ciudad de México, México.
L. Romero-Resendiz, Y. T. Zhu, T. Yang, C-C. Huang. “Heterostructured antimicrobial stainless steel and method for synthesizing”, 18/161,907 (Estados Unidos) y 202310526654.7 (China), Aceptada/En impresión, (2023).
Romero-Reséndiz, L., Rossi, M. C., Seguí-Esquembre, C., & Amigó Borrás, V. (2023). Development and characterization of a new predominantly β Ti–15Mo–5In alloy for biomedical applications. Journal of Materials Science, 58, 15828–15844.
DOI:10.1007/s10853-023-09017-x
González-Guillén, C., Al Hawajreh Kamel, G., Degalez-Duran, E., Klyatskina, E., Naeem, M., Romero-Reséndiz, L.*, González, G., & Amigó Borrás, V. (2023). The Effect of Ti/Ta Ratio and Processing Routes on the Hardness and Elastic Modulus of Porous TiNbZrTa Alloys. Materials, 16(23), 7362. (*Corresponding author)
DOI:10.3390/ma16237362
Elizalde, S., Ezequiel, M., Romero-Resendiz, L., Cabrera, J. M., Gonzalez, G. (2023). Texture and strain rate sensitivity analysis of solid solution and precipitation hardening aluminum alloys processed by repetitive corrugation and straightening. Superplasticity in Advanced Materials: ICSAM 2023, 32, 362-370.
DOI:10.21741/9781644902615-41
Romero-Resendiz, L.*, Naeem, M.*, & Zhu, Y. (2023). Heterostructured materials by Severe plastic Deformation: Overview and Perspectives. Materials transactions, 64(10), 2346-2360.
DOI:10.2320/matertrans.mt-mf2022010
Romero-Resendiz, L.*, Rossi, M. C., Segui-Esquembre, C., Amigo-Borras, V. (2023) Development and characterization of a new predominantly-β Ti-15Mo-5In alloy for biomedical applications. Journal of Materials Science. Accepted/In press.
Romero-Resendiz, L., Kong, H., Zhang, T., Ni, H., Chen, S., Naeem, M., & Zhu, Y. (2023). Achieving antimicrobial and superior mechanical properties in a scalable and cost-effective heterostructured stainless steel. Materials Science and Engineering: A, 886, 145676.
DOI:10.1016/j.msea.2023.145676
Hawajreh, G. A., Gonzalez, G.*, Romero-Resendiz, L.*, Vidilli, A. L., Otani, L. B., & Amigó-Borrás, V.* (2023). Effect of the Ti/Ta ratio on the feasibility of porous Ti25+x-Nb25-Zr25-Ta25-x (X= 0, 5, and 10) alloys for biomedical applications. Journal of Materials Research and Technology, 24, 4364-4378.
DOI:10.1016/j.jmrt.2023.04.070
Romero-Resendiz, L.*, Rossi, M., Seguí-Esquembre, C., & Amigó-Borrás, V. (2023). Development of a porous Ti–35Nb–5In alloy with low elastic modulus for biomedical implants. Journal of Materials Research and Technology, 22, 1151-1164.
DOI:10.1016/j.jmrt.2022.12.011
Romero-Resendiz, L., El-Tahawy, M., Zhang, T., Rossi, M., Marulanda-Cardona, D., Yang, T., Amigó-Borrás, V., Huang, Y., Mirzadeh, H., Beyerlein, I. J., Huang, J., Langdon, T. G., & Zhu, Y. S. (2022). Heterostructured stainless steel: Properties, current trends, and future perspectives. Materials Science and Engineering R, 150, 100691.
DOI:10.1016/j.mser.2022.100691
Romero-Resendiz, L., Hernandez, M. T., Cabrera, J. A., Elizalde, S., Amigó-Borrás, V., Figueroa, I. A., Covelo, A., & Gonzalez, G. (2022). Repetitive corrugation and straightening effect on the microstructure, crystallographic texture and electrochemical behavior for the Al-7075 alloy. Journal of applied research and technology, 20(3), 284-297.
DOI:10.22201/icat.24486736e.2022.20.3.1789
Tajdary, P., Morin, L., Romero-Resendiz, L., Gorji, M., Braham, C., & Gonzalez, G. (2022). Analysis of shear ductile damage in forming processes using a micromechanical model with void shape effects. International Journal of Solids and Structures, 248, 111640.
DOI:10.1016/j.ijsolstr.2022.111640
Romero-Resendiz, L.*, Rossi, M., Álvarez, A. J., García-García, A., Milian, L., Tormo-Más, M. Á., & Amigó-Borrás, V. (2022). Microstructural, mechanical, electrochemical, and biological studies of an electron beam melted Ti-6Al-4V alloy. Materials today communications, 31, 103337.
DOI:10.1016/j.mtcomm.2022.103337
Romero-Resendiz, L., Cabrera, J., Elizalde, S., Amigó-Borrás, V., Figueroa, I. A., & González, G. (2022). Mechanical, stress corrosion cracking and crystallographic study on flat components processed by two combined severe plastic deformation techniques. Journal of materials research and technology, 18, 1281-1294.
DOI:10.1016/j.jmrt.2022.03.010
Correa-Rossi, M., Romero-Resendiz, L., & Amigó-Borrás, V. (2022). Magnesium in Synthesis of Porous and Biofunctionalized Metallic Materials. Intechopen, Book Chapter.
DOI:10.5772/intechopen.102083
Correa-Rossi, M., Romero-Resendiz, L., Leal-Bayerlein, D., Garcia-Alves, A. L., Segovia-López, F., & Amigó-Borrás, V. (2022). Mechanical, Corrosion, and Ion Release Studies of Ti-34Nb-6Sn Alloy with Comparable to the Bone Elastic Modulus by Powder Metallurgy Method. Powders, 1(1), 3-17.
DOI:10.3390/powders1010002
Romero-Resendiz, L., Amigó-Borrás, V., Vicente-Escuder, A., Elizalde, S., Cabrera, J., Pineda-Ruiz, D., Figueroa, I. A., & González, G. (2021). Effect of the microstructure generated by Repetitive Corrugation and Straightening (RCS) process on the mechanical properties and stress corrosion cracking of Al-7075 alloy. Journal of materials research and technology, 15, 4564-4572.
DOI:10.1016/j.jmrt.2021.10.043
Romero-Resendiz, L.*, Gómez-Sáez, P., Vicente-Escuder, A., & Amigó-Borrás, V. (2021). Development of Ti–In alloys by powder metallurgy for application as dental biomaterial. Journal of materials research and technology, 11, 1719-1729.
DOI:10.1016/j.jmrt.2021.02.014
Romero-Resendiz, L., Flores-Rivera, A., Figueroa, I. A., Braham, C., Reyes-Ruiz, C., Alfonso, I., & Gonzalez, G. (2020). Effect of the initial ECAP passes on crystal texture and residual stresses of 5083 aluminum alloy. International Journal of Minerals Metallurgy and Materials, 27(6), 801-808.
DOI:10.1007/s12613-020-2017-0
Romero-Resendiz, L., Figueroa, I. A., Reyes-Ruiz, C., Cabrera, J., Braham, C., & González, G. (2019). Residual stresses and microstructural evolution of ECAPed AA2017. Materials Characterization, 152, 44-57.
DOI:10.1016/j.matchar.2019.04.007